T-ZGM130S Z-Wave 700 SiP Module Data Sheet

T-ZGM130S Z-Wave 700 SiP Module Data Sheet

The Silicon Labs Z-Wave 700 SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions.

It is an ideal solution for energy-friendly smart home control applications such as motion sensors, door/window sensors, access control, appliance control, building automation, energy management, lighting, and security networks in the “Internet of Things”.

Built with low-power Gecko technology, which includes innovative low energy techniques, fast wake-up times and energy saving modes, the ZGM130S reduces overall power consumption and maximizes battery life.

The module contains a native security stack and a comprehensive set of hardware peripherals usable for advanced device functionality, and offers 64 kB of flash memory for OEM applications.

Z-Wave 700 ZGM130S modules can be used in a wide variety of applications:

  • Smart Home
  • Security
  • Lighting
  • Health and Wellness
  • Metering
  • Building Automation

Feature List

The ZGM130S highlighted features are listed below:

Low Power Wireless System-on-Chip:

  • High Performance 32-bit, 39 MHz ARM Cortex®-M4 with DSP instruction and floating-point unit for efficient signal processing
  • Embedded Trace Macrocell (ETM) for advanced debugging
  • 512 kB flash program memory (64 kB available for user applications)
  • TX power up to 14 dBm
  • Supports optional external SAW filter

Low Energy Consumption:

  • 9.8 mA RX current at 100 kbps, GFSK, 868 MHz
  • 40.1 mA TX current at 14 dBm output power at 912 MHz
  • 40.7 mA TX current at 13 dBm output power at 868 MHz
  • 13.3 mA TX current at 0 dBm output power at 908 MHz
  • 69 μA/MHz in Active Mode (EM0)
  • 0.8 μA EM4 current (128 Byte RAM retention and RTCC running from LFRCO)

High Receiver Performance:

  • -97.9 dBm sensitivity at 100 kbit/s GFSK, 868 MHz
  • -97.5 dBm sensitivity at 100 kbit/s GFSK, 915 MHz
  • 103.9 dBm sensitivity at 100 kbit/s DSSS O-QPSK, 912 MHz

Supported Protocols:

  • Z-Wave
  • Z-Wave Long Range

Support for Internet Security:

  • General Purpose CRC
  • True Random Number Generator (TRNG)
  • 2 x Hardware Cryptographic Acceleration for AES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) and ECC

Wide Selection of MCU peripherals:

  • 12-bit 1 Msps SAR Analog to Digital Converter (ADC)
  • 2 x Analog Comparator (ACMP)
  • 2 x Digital to Analog Converter (VDAC)
  • 3 x Operational Amplifier (Opamp)
  • Digital to Analog Current Converter (IDAC)
  • Low-Energy Sensor Interface (LESENSE)
  • Multi-channel Capacitive Sense Interface (CSEN)
  • 32 pins connected to analog channels (APORT) shared between analog peripherals
  • 32 General Purpose I/O pins with output state retention and asynchronous interrupts
  • 8 Channel DMA Controller
  • 12 Channel Peripherals Reflex System (PRS)
  • 2 x 16-bit Timer/Counter
  • 3 or 4 Compare/Capture/PWM channels
  • 1 x 32-bit Timer/Counter
  • 3 Compare/Capture/PWM channels
  • 32-bit Real Time Counter and Calendar
  • 16-bit Low Energy Timer for waveform generation
  • 32-bit Ultra Low Energy Timer/Counter for periodic wake-up form any Energy Mode.
  • 16-bit Pulse Counter with asynchronous operation
  • 2 x Watchdog Timer
  • 3 x Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO7816)/IrDA/I2S)
  • Low Energy UART (LEUART ™)
  • 2 x I2C interface with SMBus support and address recognition in EM3 Stop

Wide Operating Range:

  • 1.8 V to 3.8 V single power supply
  • Integrated DC-DC
  • -40 °C to 85 °C


  • 9 x 9 x 1.21 mm


Chip Protocol Stack Max TX Power Antenna Flash (kB) RAM (kB) GPIO Carrier
T-ZGM130S037HGN2 Z-Wave 14 dBm RF pin 512 64 32 Tray
T-ZGM130S037HGN2R Z-Wave 14 dBm RF pin 512 64 32 Tape & Reel

For additional information and to download the complete data sheet for the T-ZGM130S, please click here.